When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Keyless Remote VIPER 2-WAY LCD Car STARTER ALARM Key FOB EZSDEI489 7345V OEM fab
- Item No : 226677445684
- Condition : Used
- Brand : ViPER
- Seller : u.s.autoparts
- Current Bid : US $85.40
-
* Item Description
-
Why purchase a recycled keyless entry remote transmitter?
The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!
Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #.
What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system.
Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below.
Compatible FCC ID#(s):
FCCID FCC ID EZSDEI489 EZSDE1489 Viper 7345V, 2-Way LCD, Antenna 6213T, FCC ID: EZSDEI489
This is the Viper 7345V 2-Way Replacement Remote Control. It is a 4 Button Remote Control.
Alternate Spellings
7345V 7341P 7345X
Part #(s)
IC ID:
1513A-489 1513A489
Replacement for OE Part Numbers: 7345X 7341X
Compatible Antenna Number
Button Count:
4 buttons; Lock, Unlock Trunk Release Opener
Battery (installed):
1; AAA installed
Frequency:
433 MHz
LED Light Color:
SCREEN
Works on these Code Alarm systems:
Works with the following Clifford systems:
Matrix 1X
Matrix 3305X
Matrix 5305X
VIPER SYSTEMS
R350, 3305V, 4305V & 5305V
Direct replacement for the following Python systems:
Responder 460 3301P 3302P 3305P 5305P 3201P 3202P 700 702 900 902
- 700
- 702
- 900
- 902
- 3201P
- 3202P
- 3301P
- 3302P
- 3305P
- 5305P
- Responder 460
#s on Chip on board:
Condition Notes:
Pre-Owned ready to program to your compatible vehicle RKE system.
Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.
Remote Programming Routine Programming Procedure:
1. Prepare Vehicle for Pairing
2. Door. Open a door.
3. Key. Turn the key to the ON position
4. Choose. Withing 5 seconds press and release the Valet/Program button the number of times corresponding to the table below.
TABLE # of times Model 5305V = 1 time
TABLE # of times Model R350 or 3305V = 7 times
5. Then press the Valet/Program button once more and hold it. The LED flashed the same number of times as the channel selected and the siren chirps to confirm the selected channel. DO NOT release the valet/program button.
6. TRANSMIT. While holding the valet/program button, press the LOCK button on the remote. The unit chirps to confirm that the remote has been paired with the receiver.
7. Release. Now that the remote control has been paired you can release the valet/program button and remove the key.
8. NOTE refer to owner’s guide for remote control operation
Why does your vehicles installed RKE / Security system determine which remote control your can purchase?
The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.
Programming:
We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.
Programming Requirement Information NOTE:
The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:
1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.
2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.
To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:
i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)
ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)
3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.
4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).
5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).
6. There are also many auto forums that you can go onto by just conducting a google search with your questions.
7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.
