When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The Prastel MPSTP2E is a durable 433.92 MHz 2 button remote control compatible with all Prastel rolling code systems. 1. On fob A press both buttons simultaneously and release at once.. Light comes on and then goes off. After 2 seconds light come on again and remains steady. 2. Immediately press both buttons again until light flashes and release. Light flashes red and green and then after a few seconds flashes green very rapidly for a few seconds. It is this signal which sets the gate receiver into programming mode. When rapid flashing stops you have 10 seconds to press the left hand button on fob B. Keep it pressed for 2 seconds and release. This then locks fob B into the gate memory. 2. Take the new transmitter and press the button that you wish to use to operate your receiver for one se.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.