Terasic DE0-Nano FPGA Development Board and Education Board Comes w/ USB CablePp

* Item Description

Terasic DE0-Nano FPGA Development Board and Education Board Comes with USB Cable for Beginners

Description:
The DE0-Nano board introduces a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone IV device up to 22,320 LEs.

The DE0-Nano has a collection of interfaces including two external GPIO headers to extend designs beyond the DE0-Nano board, on-board memory devices including SDRAM and EEPROM for larger data storage and frame buffering, as well as general user peripheral with LEDs and push-buttons.

The advantages of the DE0-Nano board include its size and weight, as well as its ability to be reconfigured without carrying superfluous hardware, setting itself apart from other general purpose development boards. In addition, for mobile designs where portable power is crucial, the DE0-Nano provides designers with three power scheme options including a USB mini-AB port, 2-pin external power header and two DC 5V pins.

Specifications:
For Cyclone IV EP4CE22F17C6N FPGA
* 22,320 Logic elements (LEs)
* 594 Embedded memory (Kbits)
* 66 Embedded 18 x 18 multipliers
* 4 General-purpose PLLs
* 153 Maximum FPGA I/O pins

Configuration Status and Set-Up Elements
* On-board USB-Blaster circuit for programming
* FPGA Serial Configuration Device (EPCS)

Expansion Header
* Two 40-pin Headers (GPIOs) provides 72 3.3V I/O pins
* Two 5V power pins, two 3.3V power pins and four ground pins
* One 26-pin header provides 16 3.3V digital I/O pins and 8 analog input pins to connect to analog sensors, etc.

Memory Devices
* 32MB SDRAM
* 2Kb I2C EEPROM

General User Input/Output
* 8 green LEDs
* 2 de-bounced push-buttons
* 4 dip switches

G-Sensor
* Original ADXL345, 3-axis accelerometer (for ADI) with high resolution (13-bit)

A/D Converter
* NS ADC128S022, 8-Channel, 12-bit A/D Converter
* 50 ksps to 200 ksps

Clock System
* On-board 50MHz clock oscillator

Power Supply
* USB Type mini-AB port (5V)
* Two DC 5V pins of the GPIO headers (5V)
* 2-pin external power header (3.6-5.7V)

DE0-Nano System CD can be downloaded from:
[link removed by eBay]

Packing List:
* 1 x DE0-Nano Development Board
* 1 x USB Mini-B Cable
* 1 x DE0-Nano Quick Starter Guide
    
Packaging Details:
* Weight: 0.5kg

We only accept Payoneer.

Payoneer is the only online payment method we accept. Please make sure you have a valid/confirmed Payoneer account prior bidding. And please make sure that your Payoneer registed address is the same with your eBay registed address.  

Shipping:

It usually takes about 10-30 working days to arrive for economy shipping which not including tracking number; 7-15 working days for standard shipping which including tracking number. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

PS: We also offer faster shipping service (3-5 days to deliver), such as DHL,EMS, but buyers need to pay for the extra shipping cost. Please contact us if you need it.

Return Policy:

If you are dissatisfied with our item or service, then please follow the good eBay practice to contact us by eBay message before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner.

We always reply to eBay messages within 1-2 business days. If you do not get a response from us, then please check your eBay message.

Only unused, undamaged and original condition item can be qualified for a return. 

Feedback:

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us instead of leaving negative feedback. We will reply your email within 24 working hours.