Visionis Door Buzzing System 600lbs Magnetic Lock Wireless Kit with Multi-Entry INSTALLATION VIDEO: View on YouTube Kit Contains:(1) 600lbs Mag lock(1) Wireless Receiver(2) Wireless Remotes(2) 12v1000ma Power Supplies(1) Exit Button MAG LOCK 600LBSThe VISIONIS 600 series electromagnetic locks are renown with its excellent holding force and the remarkable features. The series compliance to CE and PSB Test are manufactured under the highest quality control to achieve the commitment to customer who always satisfied with maximum quality and reliability.SPECIFICATIONS: SPECIFICATIONS:- Voltage Input: 12 VDC / 24 VDC- Current Draw: 12V / 500mA ; 24V / 250mA (±5%)- Holding Force: Up to 600 lbs (272 kg)- Hall Effect Contact: SPDT rated 2A at 24 VDC- Magnetic Contact Rating: 28 VDC, 0.5A, 10W- Anti-Rust Surface Treatment: Blue Zinc Plating- Operating Temperature: 0~55° C (32~131° F)- Operating Humidity: 0~95% (non condensing)- Weight (Magnet): 1.1 kg (±1%)- Dimensions: Magnet - (L)250x(W)42x(T)25 mm- Armature - (L)180x(W)38x(T)11 mm FEATURES:- Dual Voltage Selectable (12 VDC or 24 VDC)- Low Current Consumption- Reliable Holding Force- Hall Effect Sensor Monitoring Output- Green/Red LED Indication for EM Lock Status- Built-in Mag.Contact for Door Status Monitoring- Durable and Silence Operation- Cosmeticize Anodized Aluminum Casing- Surge & Spike Protection PCB- Anti-Tamper Jam Nuts- Compact Size for Small Doors, Cabinets etc.- Full Range of Optional Brackets- Anti Residual Magnetism Kick Off Button WIRELESS RECEIVERThe VISIONIS VIS-8004 RF wireless Receiver was built to feed the demand for a device that can meet multiple functions without having to purchase additional devices. The VIS-8004 RF receiver can be used to control all sorts of Electrical devices such as Garage door Openers, Lights, Motorized gates, Mag locks, Electric Strikes, lifts and many more devices. SPECIFICATIONS:Operating Frequency 315mhzNumber of Codes 1,048,576Data Format PWMOperating Voltage +12V 24VOperating Distance Up to 320 Feet (100M)Operating Temperature 0-70 C or 32 - 158 FCurrent Draw 19mASensitivity -100DBCompatible Transmitter VIS-8005RF channels OneNo. of Remotes that are able to connect to one Receiver: Up to 20Receiver Output: C dry contact (NO/NC/COM)Receiver Output Functions: 5 (Default) 4 second momentary, 1-sec momentary, toggle, validity, latchConnectors 5 screw Terminal (NO, COM, NC + -)Case Construction ABS PlasticDimensions 63mm*45mm*30mm (2.4 Inches* 1.77 Inches*1.18 inches)Weight 43g or 1.52 OuncesCertifications FCCAntenna Wire leadMounting Screws Comes with two mounting screwsWarranty 1 Year WIRELESS REMOTESThe model VIS-8005 is a 1-Channel 315 MHz charcoal and silver remote supplied with a quick-disconnect key ring. This transmitter (remote) is designed for use with the VISIONIS VIS-8004 1 channel receiver. This transmitter (remote) has over 1,048,576 codes of programming which makes it virtually impossible of the codes being duplicated. The receiver programs each specific code; no unauthorized person can gain access to the system by reprogramming or duplicating the Transmitter (remote). This transmitter (remote) can be programmed locally into the memory of the receiver (VIS-8004). SPECIFICATIONS:Model Number: VIS-8005Voltage: 12/24VFrequency: 315 MHzCurrent Draw: 10MaNumber of Buttons: 1Encoding Type: FixedOperating Distance: Up to 320 Feet (100M)Compatible Receiver: VIS-8004No. of Remotes that are able to connect to one receiver: Up to 20LED Transmission: Blue LED lightIncludes: 2 pieces of the 6V CR2016Over 1,048,576 codes Instructions to program a new Transmitter (remote): Note: Before you start to program the Transmitter (remote) make sure you have the Receiver ready to be programmed. You may only use the Vsionis Receiver model number VIS-8004. Each VIS-8004 Visionis receiver can program up to 20 Transmitters (remotes) (VIS-8005) Make sure that while you are programming the transmitter (remote) you have the remote in your hands ready to be programmed. Press the programming switch for 3 seconds or more. The channel’s LED will start to flash quickly. This will indicate that it is in programming mode. When the LED light begins to Flash, Press the button of the Transmitter (remote) to be programmed one time. The receiver’s Channel light will flash once to show that that the transmitter (remote) has been programmed successfully. After the transmitter (remote) has been programmed the receiver will automatically exit the programming EXIT BUTTONThe VISIONIS Request-to Exit Buttons and Switches offers a variety of options to fit several applications needs. The VISIONIS line is designed to provide a reliable source of egress access controlled opening devices in residential, commercial and Industrial locations. The VISIONIS Request-to Exit Buttons may be connected to the request-to-exit input of any access control device or directly connected to an electromagnetic lock or Electric strike Device. SPECIFICATIONS and FEATURES:• Stainless-steel face-plate.• "PUSH TO EXIT" & "PRESIONE PARA SALIR" inserts included.• Fits into standard single-gang box.• Large round green color push button.• Five colored, 12-Inch, AWG 18 wire leads• Degree of Protection: IP-40• LED: Yes• LED Life: 20000hours• Switch Material: Plastic• Switch Plate Material: Stainless Steel• Dimension of Mounted Switch: 57 mm or 2.24 Inch• Dimension of Exit Button: 115L×70W×5H mm or 4.52L×2.75W×0.19H Inch• Background Color: Green Color + PUSH TO EXIT (Black Word)• Standard: U. S. A Standard• NO/NC contact rated 10A@125~250 VAC.• Illum. S.P.D.T. SHIPPING:For domestic orders shipped to all of the United States including Puerto Rico, Alaska and Hawaii. FPC Security offers free USPS Priority mail and UPS services. The package will be received with in 2 to 5 business days. RETURNS:-Qualifying return requests will result in a Return Authorization (RA) number within one business day. You will receive your RA number and instructions on how to complete your return. RA numbers are valid for 15 days.-Merchandise returned within 60 days of purchase with the appropriate RA number will receive a full product cost refund, provided it is in perfect unused, uninstalled condition in its original undamaged and unmarked packaging. Packages must be complete with all instructions and warranty cards.-Defective products are replaced or repaired according to the manufacturer’s warranty policy.-Shipping costs are not refundable, but FPC-Security will pay the USPS MAIL or UPS GROUND freight to ship your exchanges or replacements for defective merchandise. Upgraded air shipping is available at additional cost.